Yonico Small Lock Miter Router Bit - 45° - 1/2" Stock - 1/2" Shank 15129

<p>Use the reversible 45° lock meter glue joint router bit to join boards at 90°. The interlocking 45° cuts will produce extremely strong joints without having to struggle to keep the boards in place during clamping. Additionally, it will provide extra gluing surface resulting in an extremely strong and durable joint. When positioned properly, the bit will cut both pieces of stock without having to adjust the bit. It can be little tricky at first but when positioned properly, the bit will cut both pieces of stock without having to adjust the bit. Align the centre of the cutter with the centre of the stock when the stock is in the horizontal position and in the vertical position. Then, cut one piece horizontally and the second one vertically and the joint should line up perfectly. Instructions are available from the manufacturer upon request. Note: Lock meter bits only work properly on solid wood. MDF and plywood are not recommended.</p>

• Two flute carbide cutters & 1/2" shank.
• Join boards at a 90 degree angle with an interlocking profile for a perfectly aligning joints
• Premium C3 micro-grain Carbide blades for a sharper & longer lasting edge