JVCC DC-PETF35-R Double-Sided Red Polyester Film Tape: 1 in x 60 yds. (Red)

<p><b>JVCC DC-PETF35-R Double-Sided Polyester Film Tape</b> is an opaque red polyester film coated on both sides (AKA double-coated) with an aggressive high-performance clear acrylic adhesive. This double-sided tape is used for splicing paper, corrugated paper, plastics, films, foils, low/high energy surfaces, and other continuous web processes when a visual splice is critical. The tape has high tack, adhesion and shear strength and also has excellent low and high-temperature resistance. The tape comes on a white siliconized paper release liner. Made in the U.S.</p> NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 24mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.<br><br><b>Technical Information</b><br>- Core: 3 inch diameter <br>- Backing/Carrier: polyester (PET) film <br>- Adhesive: solvent-based acrylic adhesive <br>- Release Liner: white siliconized paper <br>- Thickness: 3.5 mils (carrier, adhesive) 0.5 mils (carrier) 3.2 mils (liner) <br>- Adhesion: 95 ounces per inch (to stainless steel test panel) <br>- Tensile Strength: 7.5 pounds per inch (longitudinal) <br>- Application Temperature: 50F (minimum) <br>- Service/Operating Temperature: -40F to 225F <br>- Elongation: 100 % <br>

• JVCC DC-PETF35-R Double-Sided Polyester Film Tape is an opaque red polyester film coated on both sides (AKA double-coated) with an aggressive high-performance clear acrylic adhesive.
• This double-sided tape is used for splicing paper, corrugated paper, plastics, films, foils, low/high energy surfaces, and other continuous web processes when a visual splice is critical.
• The tape has high tack, adhesion and shear strength an also has excellent low and high-temperature resistance.
• Carrier/Backing: polyester (PET) film. Adhesive: solvent-based acrylic adhesive. Release Liner: white siliconized paper.
• Thickness: 3.5 mils (carrier, adhesive) 0.5 mils (carrier) 3.2 mils (liner). Adhesion: 95 ounces per inch (to stainless steel test panel). Tensile Strength: 7.5 pounds per inch (longitudinal). Service/Operating Temperature: -40F to 225F. Application Temperature: 50F (minimum). Elongation: 100%. Core: 3-inch diameter.