5952 VHB Tape: 2.5cm . x 15 ft. (Black)

3M 5952 Heavy Duty Mounting VHB Tape is black, double-coated VHB adhesive tape with an acrylic foam core. A modified acrylic adhesive is on both sides of very conformable foam which provides adhesion to the broadest range of substrates/surfaces, including most powder coated paints. Comes on a red film release liner.3M VHB Tape provides the convenience and simplicity of a tape fastener and are ideal for use in many interior and exterior bonding applications. In many situations, they can replace rivets, spot welds, liquid adhesives, and other permanent fasteners. Recommended to use 4 square inches of 5952 VHB tape for every 1 pound of load; although rough surfaces may require additional tape. These VHB tapes are made with an acrylic foam which is viscoelastic in nature. This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics. The acrylic chemistry provides outstanding durability performance and the tapes have excellent durability and excellent solvent and moisture resistance. Country of Origin: United States.

• 3M 5952 Heavy Duty Mounting VHB Tape is black, double-coated VHB adhesive tape with an acrylic foam core. A modified acrylic adhesive is on both sides of very conformable foam which provides adhesion to the broadest range of substrates/surfaces, including most powder coated paints. It comes on a red film release liner.
• 3M 5952 double-sided tape (heavy-duty 45-mil) gives you the simplicity and ease of a tape fastener and is ideal for many indoor and outdoor bonding applications. 3M double-sided tape (automotive, heavy-duty applications) can, in many cases, replace liquid adhesives, rivets, spot welds, and other permanent fasteners.
• Note: It is recommended to use 4 square inches of 5952 VHB tape for every 1 pound of load. Rough surfaces may require additional tape.
• Carrier/Backing: closed-cell acrylic foam. Adhesive: modified acrylic. Release Liner: red PE film. Thickness: 50 mils (carrier, adhesive, liner) 45 mils (carrier, adhesive) 5 mils (liner).
• Adhesion: 320 ounces per inch (to stainless steel test panel). Tensile Strength: 90 pounds per inch (longitudinal). Service/Operating Temperature: up to 250F. Application Temperature: 50F to 100F. Core: 3-inch diameter.